Top 10 Eastwood Powder Coat Oven

We make a short list of the best eastwood powder coat oven including detail information and score based on 27,061 reviews analysed. Let’s find out which is your favorite one.

Best eastwood powder coat oven

1. 124 Piece High Temp Silicone Plug, Cap, Masking Tape and Hook Assortment – Complete Masking System Kit for Powder Coating, Painting, Anodizing, Plating & Media Blasting

124 Piece High Temp Silicone Plug, Cap, Masking Tape and Hook Assortment - Complete Masking System Kit for Powder Coating, Painting, Anodizing, Plating & Media Blasting

Feature

Description

This 124 Piece High Temp Silicone Cap Plug, Cap, Masking Tape and Hook Kit has everything you need to get your custom finishing job done right. This kit contains an assortment of caps and plugs to effectively cover or plug anything from 1/16″ up to 5/8″. You will also recieve one 72 yard long roll of 3/8″ wide high temp masking tape for the flat surfaces you don’t want to coat and 25 reusable heavy duty hanging hooks to hold your parts. Excellent for powder coating, painting, plating, anodizing, media blasting or anywhere that superior protection is needed.

2. Powder Coating Oven Controller Kit, 240V 50A 12000W (KIT-PCO2)

Powder Coating Oven Controller Kit, 240V 50A 12000W (KIT-PCO2)

Feature

Description

Free US shipping for limited time only!

This is our second generation kit to DIY a control system for powder coating oven (approx. 4’x4’x6′ size). The circuit is designed for a 240 V dual output system with a total oven draw no more than 50 Amps. It not only has an additional timer readout, but also independent control for dual heater output. Wiring diagram and punching specification are available after purchase.

This kit includes each of the following:
12x10x8″ Wall mount enclosure with complete precut, and heat sink.
PID controller w/ connection to the timer.
Two 40 A Solid State Relay.
General purpose timer.
Flashing Buzzer for temperature/timer alarm.
Yellow LED for showing heater status.
Black selector switches for timer alarm silence.
Black selector switch for temperature alarm silence.
Two yellow illuminated selector switches for element control.
Blue illuminated selector switch for reseting timer.
Oven temperature probe w/ mounting screw (both sensor and cable are rated for 900 º F).
Two 1/2-inch EMT conduit fitting for element connection.
Strain Relief Power Cord Connector for hard-wiring input power.
Breaker Switch for main power control.
DIN Rail Terminal Block Kit for power distribution.
Engraved Panel Tags for labeling.

The kit does not include:
Heating element.
Input power cord.
Wiring and wiring fittings.

Note:
1. The enclosure only has two 1/16 DIN precut on the front panel.
2. If you need light & fan control, please check amzn.com/B073X1CCY1
3. The kit is designed for N.America 240V power line that requires 4-line power(L1, L2, Neutral and GND). For the customers in other countries, please contact us: https://goo.gl/fbnRDL

Warranty: 6 months.

All items sold on Amazon cannot be price-matched with auberins.com

3. Ultimate Chrome Powder Coating Paint (1 LB)

Ultimate Chrome Powder Coating Paint (1 LB)

Feature

Description

100% Brand New, Virgin Ultimate Chrome Powder Coating Paint. This is the ultimate chrome that can be used for the most reflective base coat for your candy and transparent coatings! This color REQUIRES a clear top coat if you are not using a candy or transparent top coat.

4. Midnight Blue Metallic Powder Coating Paint (1 LB)

Midnight Blue Metallic Powder Coating Paint (1 LB)

Feature

Description

100% Brand New, Virgin Midnight Blue Metallic Powder Coating Paint. This is a beautiful, dark blue with a fine and heavy blue metallic flake. This is a high gloss, single stage color! Polyester Cure Schedule: 10 Minutes at 400 Degrees (Part Metal Temperature) Gloss Level: 85+ Specific Gravity: 1.5 Salt Spray: 1,000 Hours Pencil Hardness: 2H

5. 160pc High Temp Silicone Rubber End Cap and Tapered Stopper Plug Assortment Kit Powder Coat Coating Paint Masking Supplies

160pc High Temp Silicone Rubber End Cap and Tapered Stopper Plug Assortment Kit Powder Coat Coating Paint Masking Supplies

Feature

Description

Make your next finishing project a success with this 160 piece high temp silicone plug and cap kit. This kit has an assortment of high temperature rated caps and plugs to fit almost anything between 1/16″ and 3/4″ in diameter. The tapered design of the stopper style plugs allows them to fit a variety of different hole sizes. The end caps are flexible which allows them to fit most common size studs, bolts, etc. Don’t worry about heat either – with a maximum temperature rating of 600°F for up to 20 minutes they are perfect for high temperature finishing applications. Say goodbye to chasing and tapping threads by masking them off properly before applying your coating. Made for the most demanding applications, this high grade silicone will not melt, harden or bleed under normal conditions and can be reused many times. No matter what your application – powder coating, painting, e-coating, sublimation, anodizing, plating, hydro dipping or media blasting, this kit is the best. The versatility of these caps and plugs makes them ideal for many uses not listed here, they are a great addition to almost any toolbox.

6. Hxtape Multi Size Choices Polyester High Temperature Green Powder Coating Masking PET Tape, Ideal to Painting, Anodizing Applications,1/4 inch, 1/2 inch, 3/4",1 inch, (36yds/roll) 4rolls

Hxtape Multi Size Choices Polyester High Temperature Green Powder Coating Masking PET Tape, Ideal to Painting, Anodizing Applications,1/4 inch, 1/2 inch, 3/4",1 inch, (36yds/roll) 4rolls

Feature

Description

Size:1/4″,1/2″,3/4″,1″-36yds-4 Rolls

Hxtape Polyester High Temperature Green Powder Coating Masking PET Tape is great for keeping your coatings off of mating surfaces, threads, or anywhere you don’t want to coat.This tape is the industry standard for powder coating, e-coating, plating, painting and anodizing.

Specifications:
RoHS compliant
Color: Green
Material: Polyimide PET(Polyethylene terephthalate)
Adhesion type: Silicone
Thickness: 2.4 mil(0.06mm),1 mil PET film, 1.4 mil adhesive.
Adhesive power(N/25mm): 8
Tensile strength(N/25mm): 125
Elongation: 55%
Breakdown Voltage: 4.5kv
Heat resistance: -10℉ to 500℉. Long-term temperature: 428 ℉(220℃) & Short-term temperature: 500 ℉(260℃)

Package including:
1 x Hxtape High Temperature Powder Coating Masking PET Tape 1/4 inch x 36yds
1 x Hxtape High Temperature Powder Coating Masking PET Tape 1/2 inch x 36yds
1 x Hxtape High Temperature Powder Coating Masking PET Tape 3/4 inch x 36yds
1 x Hxtape High Temperature Powder Coating Masking PET Tape 1 inch x 36yds

7. Sherwin Williams Mirror Gloss Black Powder Coat Paint (1 LB)

Sherwin Williams Mirror Gloss Black Powder Coat Paint (1 LB)

Feature

8. Powder Coating Oven Controller Kit w/ Light & Fan Control, 240V 30A 7200W (KIT-PCO-LF)

Powder Coating Oven Controller Kit w/ Light & Fan Control, 240V 30A 7200W (KIT-PCO-LF)

Feature

9. Eastwood Hotcoat Powder Coat Dark Green 1 Lb Durable Chemical Impact Resistant Smooth Finish

Eastwood Hotcoat Powder Coat Dark Green 1 Lb Durable Chemical Impact Resistant Smooth Finish

Feature

10. 3/4" Wide High Temp Masking Tape for Powder Coating, Custom Painting, Hydrodip, Sublimation – Green Polyester Silicone Adhesive

3/4" Wide High Temp Masking Tape for Powder Coating, Custom Painting, Hydrodip, Sublimation - Green Polyester Silicone Adhesive

Feature

Description

This high temperature masking tape is a great fit for any powder coater or other finishing professional. This rugged tape is great for keeping your coatings off of mating surfaces, threads, or anywhere you don’t want to coat. Having some powder coating or custom painting done? Save a bunch of money by doing your own masking! This tape lays down flat and cuts easily with a razor blade. Also great for sublimation and heat transfer work. High temperature polyester masking tape is the industry standard for powder coating, e-coating, plating, painting and anodizing. This high grade tape withstands most chemicals and heat up to 400 degrees Fahrenheit (205 degrees Celsius) for 20 minutes without peeling or breaking. The thin silicone adhesive holds the tape tight to the substrate yet peels off cleanly without leaving residue after curing.

Conclusion

By our suggestions above, we hope that you can found eastwood powder coat oven for you.Please don’t forget to share your experience by comment in this post. Thank you!