Finding your suitable readers for admiral-3 pcb is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for admiral-3 pcb including detail information and customer reviews. Let’s find out which is your favorite one.
582 reviews analysed
1. AUSTOR 100 Pcs PCB Board Kit Including 30 Pcs PCB Boards 30 Pcs 40 Pin 2.54mm Header Connector(Bonus: 10 Pcs 2P&3P Terminal Blocks and 30 Pcs Caps)
2. ALLDREI 100 Pcs Double Sided PCB Board Prototype Kit for DIY Soldering Compatible with Arduino Kits
- PCB Board: 30 pieces double sided PCB prototype boards in 4 sizes, Double sided board with plated-thru holes allows components to be easily soldered to either side of the board
- 3 Types of Header Connector: 10 pieces 40 pin male header, 10 pieces 40 pin pitch right angle male headers, 10 pieces 40 pin female header
- pitch: 0.1’/2.54mm, single row and straight connector
- 2 Types of Terminal Blocks: 5 pieces 2.54-308-2P and 5 pieces 2.54-308-3P
- Pitch: 0.1’/2.54mm
- Jumper caps: 30 pieces standard 2.54mm pin spacing circuit board jumper cap
- 100 % SATISFACTION GUARANTED: General purpose prototyping circuit board for analog and digital use
- With pre-tinned plated holes
- Extra accessories to make life easy for you (Screw Terminal Block and Headers)
PCB Board features and info:
– 10 pcs 2 x 8 cm (168 solder points) with a matrix of 6 by 28 Plated Through Hole (PTH)
– 10 pcs 3 x 7 cm (240 solder points) with a matrix of 10 by 24 PTH
– 5 pcs 4 x 6 cm (280 solder points) matrix of 14 by 20 PTH
– 5 pcs 5 x 7 cm (432 solder points) matrix of 18 by 24 PTH
★ ★ Header Sockets
– 10 pcs 1 x 40 Pin Male Header Pin
– 10 pcs 1 x 40 Pin Female Header Pin
– 10 pcs 1 x 40 Pin Right Angle Male Header Pin
Pitch 0.1’/2.54mm; pin length 11.5mm / 0.45′;
★ ★ Jumper Caps
– 30 pcs Jumper caps
★ ★ Terminal Blocks
– 5 pcs 2 Pole Terminal, (2.54-2P)
– 5 pcs 3 Pole Terminal, (2.54-3P)
★ Electrical Specification
Rated Voltage: 150V/AC; Rated current: 6A; Contact Resistance: 20m Ohm MAX; Insulation; Resistance: 5000M Ohm/1000V; Dielectric Strength: 1250V/1 min
★ Mechanical Specification
Temp range: -40F ~ +105C; Torque: 0.1 Nm; Wire range: 26~18AWG; MAX Soldering: +250C for 5 Sec; Strip length: 4.5mm; Pitch 0.1’/2.54mm Terminal blocks; Poles: 2P, 3P
★ Part and Material
Screw: M1.5 Steel Zinc plated; Wire guard: Brass, Ni plated; Pin header: Brass, Tin plated; Housing: PA66, UL94V-0
3. 50 Pcs Double Sided PCB Board Prototype Kit Soldering 5 Sizes, Universal Printed Circuit Board for DIY and Electronic Project
- This product contains five different sizes of circuit boards£¬2*8CM,3*7CM,4*6CM,5*7CM,6*8CM,You also can cut these pc boards into any shape any size, it can meet all your needs.
- The boards are all basic green body with soldered holes. Good plating around the holes and a nice variety of sizes for the price.
- Package comes with totally 50 pcs prototype circuit blank breadboards that is enough for various electronic and soldering project.
- The double side of the original circuit board is very strong and durable, and a tin plating process makes the welding component easier.
- Friendly and fast customer service, full refund guarantee for two months and one year warranty. If you have any problem of our product, please feel free to contact us. We will provide professional pre-sales and after-sales service.
Dimension: 2×8/ 3×7/ 4×6/ 5×7/6x8CM
Thickness: about 1.6mm
Material: Great quality of glass fiber FR4
Color: green basic, silver tone
– 20pcs 2*8CM prototype PCB universal board
– 12pcs 3*7CM prototype PCB universal board
– 10pcs 4*6CM prototype PCB universal board
– 6pcs 5*7CM prototype PCB universal board
– 2pcs 6*8CM prototype PCB universal board
4. Aven 17010 Adjustable Circuit Board Holder
5. Genmitsu CNC 3018-PRO Router Kit GRBL Control 3 Axis Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine, XYZ Working Area 300x180x45mm
- New Version: Genmitsu CNC 3018-PRO is an upgraded version of 3018. All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy. Moreover, the base height is raised to 4cm for a better stability.
- Integrated: With an integrated mainboard and custom software, communication between the software and hardware is seamless by design.
- Software: The Genmitsu uses Grbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there’s no lack of support and resources available when you get stuck.
- Versatile: Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, the Genmitsu can be used on a wide range of projects and materials.
- Simple Assembly: Assembly instructions are provided, but if you get stuck, check out the SainSmart wiki page or contact us with any questions that arise. ONE YEAR WARRANTY covered.
Designed with the absolute beginner in mind, the Genmitsu is an excellent self-teaching tool which allows you to
try your ideas on an inexpensive platform without the risk of damaging expensive equipment. Since it’s built on
Arduino and Grbl (both open source) support, tutorials, additional training, and new ideas to try are plentiful and easy
to find elsewhere online.
Effective Engraving Area: 300 x 180 x 45 mm(11.8 x 7.1 x 1.8”)
Frame Size: 400 x 330 x 240 mm(15.7 x 13.0 x 9.4″)
Frame Material: PF+ Aluminum
Z-Axis Component Material: Nylon
Spindle: 775 motor, 12V, 3000 RPM; 24V, 7000 RPM; 36V, 9000 RPM
Rated power: 60W; Maximum power: 120W
Step Motor: 1.3 A, 12V, 0.25 Nm torque (2.2 in lb)
Drill Bits: Tip 0.1 mm, 20 degree, Diameter 3.175 mm
Supported OS: Windows XP, Windows 7, Windows 8, Windows 10
Software: Grbl control(Candle)
Power Supply: 24V/4.75A
1 x DIY Router Kit
1 x Extension Rod with ER11 Collet
4 x Plate Clamp
10 x CNC Router Bits
6. Dryer Repair Kit compatible with Samsung dryer Heater element (DC47-00019A), Thermal fuse (DC96-00887A and DC47-00016A), Thermostat (DC47-00018A), Thermistor (DC32-00007A)
- 【Replaceable model】DC47-00019A: replacement for numbers 35001247, 35001119, AP4045884, 1185561, AH2038533, EA2038533, PS2038533, ERDC47-00019A
- DC47-00016A: replacement for numbers AP4201894 and PS2038378
- DC47-00018A: replacement for numbers PS2038383, AP4201898 and 35001092
- DC96-00887A: replacement for numbers PS2038484 and AP4207819
- DC32-00007A: replacement for numbers PS4204984 and AP4201716
- 【Applicable ranges】The 5 pieces dryer replacements are especially compatible with Samsung, Sears, Kenmore, Kitchen-aid and Roper models dryer. If your home dryer is one of those brands, Don’t miss this product
- 【Package includes】 1 x DC47-00019A heater element, 1 x DC96-00887A thermal fuse, 1 x DC47-00016A thermal fuse and 1 x DC47-00018A thermostat , 1 x DC32-00007A thermistor, totally 5 pieces. Superior quality, Simple installation, you can solve the problem by yourself, Save time, energy and money. I believe it will bring you a surprise
- 【Note】These dryer replacement parts are compatible spare parts (non-original) and the brand names mentioned above and any associated model names are only used to demonstrate compatibility.
- 【After-sale guarantee】The product is made of metal or stainless steel, which can be applied for a long time.If there is any quality problem or unsatisfactory,You can ask for a replacement or full refund, no questions asked,Please feel free to place your order!
7. 32 Pcs Double Sided PCB Board Prototype Kit 6 Sizes Universal Printed Circuit Protoboard for DIY Soldering Project Compatible with Arduino Kits (32 Pcs Double Sided PCB Board)
- 32 pieces double-sided prototype boards of 6 different size to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects
- Pre-tinned plated holes on the board make it very handy to solder components and sensors for your projects.
- 4 mounting holes at the corners of the board are very convenient for installing them together.
- Work with sodering welding led diode, screw terminal, dupont wire, connector, resistor, IC, DIP, sensors, transistor and other eletronic power components or devices with .1″ pin spacing. For Hobby Test, Computer Science Class experiments, point-to-point DIY IoT projects,Raspberry rasp Pi connection Perf Board.
- Lettering on both side of the PC board makes it easier for prototyping projects, Cuttable fiber glass and FR-4 flame resistant good for soldering,Muti Pins, easy to cut and solder with appropriate tools. Flux for easy soldering and extended serving life of printed blank plating thru perforated board.
Welcome to AiTrip Double Sided Porotype Board which is widely used among electronic experiments and point-to-point DIY soldering projects.
With the perfect designed pre-tined holes on the board you can easily install any sensors and components you need.
The high quality of glass fiber material and the great durability of the board can always meet you requirements in various situation.
Dimension:2×8/ 3×7/ 4×6/ 5×7/ 6X8/ 7×9 CM
Quantity: 32 pieces in total of 6 different sizes
Thickness: about 1.6mm
Material: Great quality of glass fiber FR4
Color: Green basic, silver tone
Hole-pitch: 2.54 mm/ 0.1 inches
Hole-diameter: 1 mm/ 0.04 inches
One package contain 32 pcs with 6 different sizes, Meeting different needs(large or small projects).
8pcs 2 X 8CM double-sided PCB board
8pcs 3 X 7CM double-sided PCB board
6pcs 4 X 6CM double-sided PCB board
6pcs 5 X 7CM double-sided PCB board
2pcs 6 X 8CM double-sided PCB board
2pcs 7 X 9CM double-sided PCB board
8. Penta Angel 10pcs Double-Side Prototype PCB Universal Printed Circuit Board Universal PCB Circuit Board (2x8cm)
100% Brand new and high quality
2x8cm/0.79×3.15inch Double-Side Prototype Board, Lot of 10 PCS.
Thickness : about1.6mm
Grid :about 0.1inch (2.54mm)
Hole diameter : Approx.1.0mm
All holes are plated through
Both sides are identical
10x 2*8cm Double-Side Prototype PCB Board
9. Hayward GLX-PCB-MAIN Replacement Main PCB Printed Circuit Board for Hayward Goldline AquaLogic and AquaPlus Automation Systems
This main PCB is designed to use with Hayward Goldline Aqua Logic automation and chlorination models AQL-PS-4, AQL-PS-8-V, AQL-PS-8 AQL-PS-16-V, AQL-PS-16 and also compatible for wired remote control automation model AQL-SS-6B-BOX. Weight 48 pounds.
By our suggestions above, we hope that you can found Admiral3 Pcb for you.Please don’t forget to share your experience by comment in this post. Thank you!